Copperweld® Metal-Clad (MC) Cable is a cost-stable, energy-efficient alternative to wiring methods such as conductors in conduit and cable tray.
Copperweld® MC Cable is manufactured to UL standards and complies with the National Electrical Code (NEC). When sized appropriately according to the NEC, it has the lowest voltage drop of the three branch circuit conductor material alternatives. Disincentivizing pilferage and theft, it offers thieves only a small fraction of the scrap value of single-metal copper scrap.
Copper-Clad Aluminum (CCA) Conductor — Drawn from a copper-clad aluminum rod, with the copper metallurgically bonded to an AA 8000 series aluminum core, where oxygen-free copper forms a minimum of 10 percent of the cross-sectional area of a solid conductor or each strand of a stranded conductor.
Application Standards — UL 1569
Conductors — For wire sizes 12-10, solid annealed THHN Copper-Clad Aluminum with solid Copper Clad Aluminum ground. For 8 AWG sizes and larger, stranded annealed THHN Copper-Clad Aluminum with solid Copper-Clad Aluminum ground.
Conductor Insulation — Type THHN or THWN-2 with a heat-stabilized Nylon jacket rated for 75°C in wet locations and 90°C in dry locations.
Grounding Conductor — For NM-B 12-10 AWG sizes: ground will be 12-10 AWG, solid, annealed conductor. For NM-B 8 AWG sizes and larger: ground will be 8 AWG, solid, annealed.
Metal-Clad Jacket — Lightweight steel or aluminum interlocking armor
Copperweld® Copper-Clad Aluminum Type MC (Metal-Clad cable) is referenced by Article 330 of the National Electrical Code. OSHA safety listed: UL E523379. ETL listing: 5021266.
Identified for use with Wiring Devices, Splice Connectors and Equipment Terminals Rated for Cu, Cu/Al and CO/ALR. Copperweld® MC Cable is NRTL listed for safety. It is made with ASTM B-566 Copper-Clad Aluminum bare Copperweld® wire, which carries its own component listing, RU DVVU2. Copperweld MC conductors are suitable to terminate on 15 and 20 ampere rated wiring devices (receptacles and snap switches) marked ‘copper only’ or ‘CO/ALR’. For termination on devices rated 30 amperes or greater, the termination must be marked ‘CU/AL’ or equivalent. Please consult UL Product IQ guide information RTRT and WJQR if further confirmation is required. Copperweld® MC Cable may be pigtailed to single-metal copper wire in dry or wet locations with terminals and connectors specified for such use. Copperweld® MC Cable should not be terminated with single-metal Aluminum wire without the application of an oxide inhibitor or a terminal or connector specifically listed for such use. Copperweld® ASTM B-566 Copper-Clad Aluminum wire is not dissimilar to copper, brass or zinc plated steel.
Solid
Solid
Solid
Aluminum
Aluminum
Aluminum
12 AWG
12 AWG
12 AWG
0.015
0.015
0.015
0.004
0.004
0.004
Allowable Amperage @ 60° C
15
15
15
Allowable Amperage @ 75° C*
20
20
20
Allowable Amperage @ 90° C
25
25
25
Outside Diameter (in)
0.495
0.530
0.565
Nom. Weight per lbs/1000 ft
83
100
118
Standard Packaging
250' Coil, 1000' Wood Reel
250' Coil, 1000' Wood Reel
250' Coil, 1000' Wood Reel
Solid
Solid
Solid
Aluminum
Aluminum
Aluminum
10 AWG
10 AWG
10 AWG
0.020
0.020
0.020
0.005
0.005
0.005
Allowable Amperage @ 60° C
25
25
25
Allowable Amperage @ 75° C
30
30
30
Allowable Amperage @ 90° C
35
35
35
Outside Diameter (in)
0.560
0.600
0.645
Nom. Weight per lbs/1000 ft
111
136
162
Standard Packaging
250' Coil, 1000' Wood Reel
250' Coil, 1000' Wood Reel
250' Coil, 1000' Wood Reel
7 Strands
7 Strands
Aluminum
Aluminum
8 AWG
8 AWG
0.030
0.030
0.005
0.005
Allowable Amperage @ 60° C
35
35
Allowable Amperage @ 75° C
40
40
Allowable Amperage @ 90° C
45
45
Outside Diameter (in)
0.710
0.770
Nom. Weight per lbs/1000 ft
171
210
Standard Packaging
250' Coil, 1000' Wood Reel
250' Coil, 1000' Wood Reel
CCA offers a fraction of the scrap value of copper building wire.
When sized per Code, CCA delivers improved energy efficiency over alternatives.
CCA is lightweight, flexible, and terminates to standard torquing values.
NEC compliant for 600 Volt residential branch circuit conductors since 1971.
Listed for safety for use in general electrical wiring and branch circuits.
CCA has 50 years of safe performance history in standard circuits.
Check out our library of articles, updates, whitepapers and videos.
Copperweld's friendly sales team is ready to fill your order or help you select products to deliver the performance you need.
Follow us on your favorite social platforms:
Sign up for Copperweld news to learn about the latest industry updates, events, product releases, videos and technical documents.
